Os scheduling | Computer Science homework help

SMP5: Scheduler with Signals


This MP is a variation of SMP4.

In the last MP, we built a simulated OS process scheduler. The scheduler can

hold only a certain number of processes (workers) at one time. Once the process

has been accepted into the scheduler, the scheduler decides in what order the

processes execute. We implemented two scheduling algorithms: FIFO and Round


In this MP, we are to simulate a time-sharing system by using signals and

timers. We will only implement the Round Robin algorithm. Instead of using

iterations to model the concept of “time slices” (as in the last MP), we use

interval timers.  The scheduler is installed with an interval timer. The timer

starts ticking when the scheduler picks a thread to use the CPU which in turn

signals the thread when its time slice is finished thus allowing the scheduler

to pick another thread and so on. When a thread has completely finished its work

it leaves the scheduler to allow a waiting thread to enter. Please note that in

this MP, only the timer and scheduler send signals. The threads passively handle

the signals without signaling back to the scheduler.

The program takes a number of arguments. Arg1 determines the number of jobs

(threads in our implementation) created; arg2 specifies the queue size of the

scheduler. Arg3 through argN gives the duration (the required time slices to

complete a job) of each job. Hence if we create 2 jobs, we should supply arg3

and arg4 for the required duration. You can assume that the autograder will

always supply the correct number of arguments and hence you do not have to

detect invalid input.

Here is an example of program output, once the program is complete:

% scheduler 3 2 3 2 3

Main: running 3 workers with queue size 2 for quanta:

 3 2 3

Main: detaching worker thread 3075926960.

Main: detaching worker thread 3065437104.

Main: detaching worker thread 3054947248.

Main: waiting for scheduler 3086416816.

Scheduler: waiting for workers.

Thread 3075926960: in scheduler queue.

Thread 3075926960: suspending.

Thread 3065437104: in scheduler queue.

Thread 3065437104: suspending.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Scheduler: suspending 3075926960.

Scheduler: scheduling.

Scheduler: resuming 3065437104.

Thread 3065437104: resuming.

Thread 3075926960: suspending.

Scheduler: suspending 3065437104.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Thread 3065437104: suspending.

Scheduler: suspending 3075926960.

Scheduler: scheduling.

Scheduler: resuming 3065437104.

Thread 3065437104: resuming.

Thread 3075926960: suspending.

Scheduler: suspending 3065437104.

Thread 3065437104: leaving scheduler queue.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Thread 3065437104: terminating.

Thread 3054947248: in scheduler queue.

Thread 3054947248: suspending.

Scheduler: suspending 3075926960.

Thread 3075926960: leaving scheduler queue.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: resuming.

Thread 3075926960: terminating.

Scheduler: suspending 3054947248.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: suspending.

Thread 3054947248: resuming.

Scheduler: suspending 3054947248.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: suspending.

Thread 3054947248: resuming.

Scheduler: suspending 3054947248.

Thread 3054947248: leaving scheduler queue.

Thread 3054947248: terminating.

The total wait time is 12.062254 seconds.

The total run time is 7.958618 seconds.

The average wait time is 4.020751 seconds.

The average run time is 2.652873 seconds.

The goal of this MP is to help you understand (1) how signals and timers work,

and (2) how to evaluate the performance of your program. You will first

implement the time-sharing system using timers and signals. Then, you will

evaluate the overall performance of your program by keeping track of how long

each thread is idle, running, etc.

The program will use these four signals:

SIGALRM: sent by the timer to the scheduler, to indicate another time

  quantum has passed.

SIGUSR1: sent by the scheduler to a worker, to tell it to suspend.

SIGUSR2: sent by the scheduler to a suspended worker, to tell it to resume.

SIGTERM: sent by the scheduler to a worker, to tell it to cancel.

You will need to set up the appropriate handlers and masks for these signals.

You will use these functions:










Also, make sure you understand how the POSIX:TMR interval timer works.

There are two ways you can test your code.  You can run the built-in grading

tests by running “scheduler -test -f0 rr”.  This runs 5 tests, each of which can

be run individually.  You can also test you program with specific parameters by

running “scheduler -test gen …” where the ellipsis contains the parameters you

would pass to scheduler.



Part I: Modify the scheduler code (scheduler.c)


We use the scheduler thread to setup the timer and handle the scheduling for the

system.  The scheduler handles the SIGALRM events that come from the timer, and

sends out signals to the worker threads.

Step 1.

Modify the code in init_sched_queue() function in scheduler.c to initialize the

scheduler with a POSIX:TMR interval timer. Use CLOCK_REALTIME in timer_create().

The timer will be stored in the global variable “timer”, which will be started

in scheduler_run() (see Step 4 below).

Step 2.

Implement setup_sig_handlers().  Use sigaction() to install signal handlers for

SIGALRM, SIGUSR1, and SIGTERM.  SIGALRM should trigger timer_handler(), SIGUSR1

should trigger suspend_thread(), and SIGTERM should trigger cancel_thread().

Notice no handler is installed for SIGUSR2; this signal will be handled

differently, in step 8.

Step 3.

In the scheduler_run() function, start the timer.  Use timer_settime().  The

time quantum (1 second) is given in scheduler.h.  The timer should go off

repeatedly at regular intervals defined by the timer quantum.

In Round-Robin, whenever the timer goes off, the scheduler suspends the

currently running thread, and tells the next thread to resume its operations

using signals. These steps are listed in timer_handler(), which is called every

time the timer goes off.  In this implementation, the timer handler makes use of

suspend_worker() and resume_worker() to accomplush these steps.

Step 4.

Complete the suspend_worker() function.  First, update the info->quanta value.

This is the number of quanta that remain for this thread to execute.  It is

initialized to the value passed on the command line, and decreases as the thread

executes.  If there is any more work for this worker to do, send it a signal to

suspend, and update the scheduler queue.  Otherwise, cancel the thread.

Step 5.

Complete the cancel_worker() function by sending the appropriate signal to the

thread, telling it to kill itself.

Step 6.

Complete the resume_worker() function by sending the appropriate signal to the

thread, telling it to resume execution.

Part II: Modify the worker code (worker.c)


In this section, you will modify the worker code to correctly handle the signals

from the scheduler that you implemented in the previous section.

You need to modify the thread functions so that it immediately suspends the

thread, waiting for a resume signal from the scheduler. You will need to use

sigwait() to force the thread to suspend itself and wait for a resume signal.

You need also to implement a signal handler in worker.c to catch and handle the

suspend signals.

Step 7.

Modify start_worker() to (1) block SIGUSR2 and SIGALRM, and (2) unblock SIGUSR1


Step 8.

Implement suspend_thread(), the handler for the SIGUSR1 signal.  The

thread should block until it receives a resume (SIGUSR2) signal.

Part III: Modify the evaluation code (scheduler.c)


This program keeps track of run time, and wait time.  Each thread saves these

two values regarding its own execution in its thread_info_t.  Tracking these

values requires also knowing the last time the thread suspended or resumed.

Therefore, these two values are also kept in thread_info_t.  See scheduler.h.

In this section, you will implement the functions that calculate run time and

wait time.  All code that does this will be in scheduler.c.  When the program

is done, it will collect all these values, and print out the total and average

wait time and run time.  For your convenience, you are given a function

time_difference() to compute the difference between two times in microseconds.

Step 9.

Modify create_workers() to initialize the various time variables.

Step 10.

Implement update_run_time().  This is called by suspend_worker().

Step 11.

Implement update_wait_time().  This is called by resume_worker().



Question 1.

Why do we block SIGUSR2 and SIGALRM in worker.c?  Why do we unblock SIGUSR1 and

SIGTERM in worker.c?

Question 2.

We use sigwait() and sigaction() in our code. Explain the difference between the

two. (Please explain from the aspect of thread behavior rather than syntax).

Question 3.

When we use POSIX:TMR interval timer, we are using relative time. What is the

alternative? Explain the difference between the two.

Question 4.

Look at start_worker() in worker.c, a worker thread is executing within an

infinite loop at the end. When does a worker thread terminate?

Question 5.

When does the scheduler finish?  Why does it not exit when the scheduler queue

is empty?

Question 6.

After a thread is scheduled to run, is it still in the sched_queue? When is it

removed from the head of the queue? When is it removed from the queue completely?

Question 7.

We’ve removed all other condition variables in SMP4, and replaced them with a

timer and signals. Why do we still use the semaphore queue_sem?

Question 8.

What’s the purpose of the global variable “completed” in scheduler.c? Why do we

compare “completed” with thread_count before we wait_for_queue() in


Question 9.

We only implemented Round Robin in this SMP. If we want to implement a FIFO

scheduling algorithm and keep the modification as minimum, which function in

scheduler.c is the one that you should modify? Briefly describe how you would

modify this function.

Question 10.

In this implementation, the scheduler only changes threads when the time quantum

expires.  Briefly explain how you would use an additional signal to allow the

scheduler to change threads in the middle of a time quantum.  In what situations

would this be useful?

Study Locus
Calculate your paper price
Pages (550 words)
Approximate price: -

Why Work with Us

Top Quality and Well-Researched Papers

We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.

Professional and Experienced Academic Writers

We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.

Free Unlimited Revisions

If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.

Prompt Delivery and 100% Money-Back-Guarantee

All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.

Original & Confidential

We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.

24/7 Customer Support

Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.

Try it now!

Calculate the price of your order

Total price:

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.


Essay Writing Service

No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.


Admission Essays & Business Writing Help

An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.


Editing Support

Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.


Revision Support

If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.